Hello, welcome to the world of computer aided design with solid votes.
Today's session.
You are going to create the model of a spring.
The views and dimensions that will be required to create this spring model are given here.
Drying file containing the drying view is available in the resource section for download.
Well, let's get started.
Yet this model, first of all, we need to create a helical cup to go to the features.
Come on, manager.
And from this comes dropdown.
Choose the Helix and Speigel to.
Next, choose the front, clean as the sketching.
We had to circle having a radius value of twenty five units to the circle to look at the origin for
the center point of the circle.
Create a circle with the radius value of 25 units.
Glenda closed out of button, those a circle.
Property manager now of the sketch.
Using this exit sketch part of.
Alex Bitel, property manager, is displayed here.
I put the spring is seventy two point five.
I meant the height.
Red box should have this value.
It just denim really set here, start angulated box should have a value of zero degrees.
Make sure this clockwise radio button is selected, you click on the okay.
That's the spacebar on your keyboard.
And then choose this isometric button.
We have created the helical bot on the spring.
Now we need to create this right.
And clip of the that mentions that will be used to create this end clip given in these few choose the
front pane on the features design trick and then choose this sketch button from the Pop-Up menu.
This.
The spacebar will go, orientation, dialogue and next click on this normal to button click on this
centerpoint up to and from this dropdown at the center point of the point of the OPK.
Barack, the cursor on the horizontal direction click.
Create an arc, a point that goes as shows a value near to 75 degree.
You see here, and the value we have is 75 people's.
To the spot damage to the centerpoint and then his plus point of the arc is the diamond shift and change
it.
Do you think on this point, the origin point and then this plus point of the op ed plays, the angle
value changed to seventy five to.
Now choose to point off, to make up for the first point, doffed second point and get them up like
this.
An.
So this went up to OK.
The control key on the keypad and select this origin point of choose this, make what they call option
from the pop up menu display.
Seen the driving distance value is nineteen point two.
You know, the determined damage to select the Wagin and select the standpoint of the.
Sees the damage and value of the nineteen point to take on the book about Selek, this and this.
And choose this tangent option from the ad relations rollout of the property.
Property manager on the okay button despite damage in two.
And so I think this at least the damage that.
The sketches fully define.
The exit sketch button.
One more thing that we need to do is walk into this sketch we created earlier, select the lower end
point of the arc.
You did first, doesn't hold the trophy on your belly fat and then select the medical boards.
The relations fallout out of the properties.
Property manager, select this year's.
We are getting a message that item is unsolvable.
What the sketches or define or select this coincident constraint, which is applied automatically and
deleted.
See, now we have this message to sketches no longer or defined back on the occupant.
Now look on the sketch button.
We need to create space for this, but see this value for this office.
Twelve point five units and this distance valued at 60 units.
This right plain and to the sketch option from this photo of Nick.
There's the space bar on your key back and back on this normal to button the line to.
Line like this.
He this that image is close to you.
For the first point.
Second point and third escapee.
Is it the Circle property manager?
It doesn't hold the control key on your back.
If the circle sitting this line me.
Then choose this engine.
Well, dalam button.
Create a line segment like this.
So I think front quadrant of the.
Got this tremendous D tool and trim.
This part of the sketch spot.
And this.
Well, the smart dimension to the arc change this radius value twelve point five.
Again, Rome, you point out to.
Maybe up on this line segment at this point.
And place it out like this.
We can document select this, OK, select this line segment and apply the Tenjin constraint between
the two.
Okay, button.
Kate.
It's a bit silly at this point, at this point of the op and make them pointed.
OK, but now select then point of this, OK, and press and hold the control key on your back.
Select this pixilate, this fierce option.
The ad religion stood up and flick on the people again.
Listen to the control key on key back like this up like this arc.
Then choose this tangent button from the ad relations, the.
OK, your bottom interest, the spacebar on it, keep back to this moment, but now we need to trim
this unwanted part, look on the trim entities to implement this unwanted itch for the right side and
flip.
Done.
Now we need to create a sketch for the left side and.
On the okay button and click on the exit sketchpad.
We need to create a sketch on this site.
So we need to have a plan here on the reference to military dropped down.
The features come on, manager back on this plane to.
Plus, Rifkin's added, Fox is active in the Plains property market.
Look at this picture manager designed to button choose the front plane as the first shift.
Now enter a valley equal to seventy two point five in this offset distance, a digital document you
have.
You take a plane here.
So this plane and then choose this sketch.
But.
The spaceport on you keep that and make on this normal do.
Choose this center point.
OK, to take on the origin or the center point.
Pop it up like this.
Second point, Lee.
Because the show's value of seventy five years.
The okay button.
There's a small dimension to the origin point.
Still, at this point, he changed his value to twenty five euros.
Make this point the centerpoint.
Change the value to 75 degree.
I mean, choose three point up to.
Point, sticking point.
OK, but the spot damage to this point of the city center point changed the distance value to nineteen
point of press and hold it control key on your key back to this point to make the center point.
I'll choose this horizontal option from the abolition school of.
From the button game press and hold the control key and select this out.
Then this.
The tangent option to stay.
The ocular, the dimensioned tooth and.
Contest.
OK, place the damage left.
OK, but now the sketch is fully defined.
The view of that.
Doesn't hold the control key in this end point of the first half, then select Foth from Facilites.
Excuse this B.S. option on the abolition of.
In see, the sketch becomes all defined, McCain going to believe.
Disappointed in Christian.
And then he spoke about.
The contest ended sketch, but next sketch.
We are going to drop in the top for you.
Let us stop playing.
And then the sketch option from the pop up menu.
The spaceport on your key back and looked as normal, too, but the line two.
And you did not take a line like this.
Think this Fatimata so good to this point.
Second point and third point.
Select the circle, that's some pool.
The control key and select this line segment.
Choose the tangent line to locate.
A horizontal line starting from this quadrant of the circle.
This was a trim to trim unwanted.
Won't the smog damage to The View a bit like this, Centerpoint, here?
And select the centerpoint of that is the damage value and change it to 60.
In changed the view back to normal, now select this arc when the might damage in Toulouse active change,
the Spanish 12. fails to the point are to create one arc like this.
It's in the control key when you keep back like this line segment and select this.
Choose the tangent option from this adulations through about.
Into sketch a bit.
Now select this end point of the OP and hold the control key and select this end point of the other.
Choose this coincident button.
OK, but again, Preston, hold the control key and keep back select this.
OK, CIMIC this.
And choose this and option.
We can document.
So we are done with creating the other sketch also.
Look on this exit, Sketchpad.
And we need to combine all the three curves because we have to create a sweet feature.
So from this close dropdown, select this composite go to.
No cynic, the entities.
One by one from the joint media.
Rick Onda.
OK.
Now click on the script boss base to.
Was this circular profile radio button?
The fourth added box, the composite girl is already selected.
Change this diameter value to seven units.
Now click on this okay button twice.
Get out of the sweep.
Property manager.
This week, we have created the model for the spring.
High the visibility of this plane by selecting it and then choosing this high option.
Also, select the sketch and then choose the Haydock.
The spaceport on your key back button.