Welcome to the world of Computer-Aided Design with solid bones this session.
We are going to create this solid sketch for the solid model shown here of the dimensions which are
required to complete this model uprighted in this sketch.
Yet this model, the first need to be in this sketch, sketching environmental solid.
Then will use extruded Boston based to create this model of one.
Let's go to the sketching and.
Click on this front pen option here is displayed to the sketch button from this plant.
Now we are in the sketching environment where we need to create the sketch.
So far we'll create these three arcs, one shown in the dotted line.
This one and this one.
We need to create three circles produced from the central office.
Sixty nine units.
If you see the radius of these dots up 18 units, we need to create a circle radius values.
Sixty nine units.
And then we can offset their circle and offset values.
Thirdly, on either side, let's suck to the so-called two.
They get voted in the center point of the center, so the circle is 69 and click here.
Now we need to create these two outcrops, Winfield's offset entities tool for that kind of stuff,
entities to change the offset value to 13 units.
And to see the bite, that same fox is selected here.
So getting to offset your symptoms, an outside this one and one inside this on this Documentum.
Next, we need to fix the position of these two circles and see if these two circles had an angle of
60 degrees between them.
I'm clear to send a Lenfest former sketch with the line to the foreign construction checkbook's here
and create a horizontal line segment by saying to the quadrants and center of this.
Click clicking the drying area and chill to select or select this construction line and fix it location
by clicking on this fix option to go with him.
Now I will create a line segment which is in plain an angle of 30 degrees with this.
What is on the line is the line to get the origin, but does point on the length.
You can find lines like this.
Thanks to despond dimension, to this length and to the sentiment.
See the angle of lose territory.
I'll change it to 80 degrees like slight on the mid-range of these two properties, manages to displayed
in stick in this meter about but choose center like view of the mirrored line is displayed again soon.
Documentum.
Now we have a look at it center points with these two.
So I made Perfect Circle is fifteen Europe's.
The so-called food.
We'll see.
I cannot find the intersection point.
I would go to this quick snap struck down and I would select this intersection, snap mean to the circle
to hell when I hold my cursor in the intersection point.
You can find it crosses disputed and kept cool for the radius of the city, changed the radius value
to seven point five units.
It really was 50 system.
Pseudo cubitt.
Now we want to circle at this intersection point or like the circle to the minute I to making this minute
about books and cynic, the scintilla of an.
Next will create this like the circle to get the center point of the previous circle and create a circle
is having a radius of 20.
Like this, we have created two circles.
I click on the clues out of what?
Now I will believe these two minds.
This one in district.
Trim the unwanted front, click on the trim entities to this the.
Zoom into this area.
But spot.
This plot and this plot like this interlock and choose to form construction signals.
You have created this fact.
Now you need to create these central circuits.
Click on the circle to make room for this complete circle is 13 units.
We care for the radius of the circle and change its value to six point five units.
You'd run most circles at the same location.
Time radius fan is 90.
The kinda closed out of button to get out of the circle to.
Now we need to create these two bodies on the main thing.
And these two horizontal line segments are at a distance of 10 units each from the center line.
The total value stranger sitting at the center line.
Offset entities to change the offset value to them and make sure despite additional checkboxes silicon,
you take on the Kubota.
You have created these two horizontal lines.
Now we need to trim the unwanted front so the trim entities to spot.
But this one.
This one, this one, this one.
Despite despite.
Won this battle to save the.
We have created the sketch to this, but now if you see this line, this would take a line segment.
It's at a distance of 90 units from the center of the circle.
And the total length between this segment and the segment is computers.
So I haven't created one take a line segment in 50 units that is at a distance of 90 units from the
central episode back on the line to the line segment to
50 minutes in length.
Right, click into the select option.
Get out of the lane to up over the course of this Lane segment and locate its midpoint.
That's included the control key on your keyboard, like on the midpoint of this line segment.
Next click on the center point of the circuit.
You have this property is property manager here at relation's area.
Choose this horizontal at the midpoint of this line segment is in alignment with the center point opposite
to the spot dimension to was we want to place this what they call line segment at a distance.
Ninety units from the center point opposite this dimension to the center point and I this line Sigmon.
Is the damage in value and change it to 90?
Yes.
You have created this line segment now and create this line segment and segment is at a distance of
61 units from the central point of this group.
So you need to offset this line segment.
Set value of ninety minus sixty one.
Twenty nine units will take this length segment starting this month dimension to this active.
So I'm just asking.
Give us now selling this line segment offset entities to.
And I'm doing this by dedicating Checkbook's to reverse.
I think that he was checkbook's as we want to offset his dedication.
And Jane disbanded.
Twenty nine.
But if you look at the sketch length of this segment is.
T minus 20 is 20, so the length of this segment can be 20 by two.
That is genuine.
What I do is create these two horizontal line segments first line to the horizontal line thing like
this.
This line segment, the meter entities to and in the middle, about two blocks to this St. Olaf condo.
Now, delete this line segment.
Choose the line to.
Let's point and make up the segment is attenuates.
One more line segment of main thing units.
Also, the angle between these two in lines is 28 degrees angle, this line segment shifts with this
line will be 14 degrees.
I mean, choose the line to.
The first point in Inclan line segment like this.
To the smart dimension, to the center line and this line segment, jeez, the angles ran into 14 degrees.
The trim entities to trim the unwanted, but.
Keep, keep.
Get out of the TRIMM entities to select this line segment, who the media entities to.
And in a minute about editable select this center might choose the document.
We have created this part of the sketch.
Again, take on the two entities to.
This fight and this [REMOVED].
But this but now we need to change the length of these nine segments.
The total is 90.
Is 14, I think, on this segment will be 90, minus 49.
Just 41 units, so to this mod dimension to select this line segment is the dimension value.
She described decided to 51 units.
Can see the length of the segment has changed automatically as symmetric constraint is automatically
applied between these two segments.
Choose the line to Laghi plus point and create an implied line like this.
And see, the value given here is seventy five degrees.
Choose the smart dimension to direct this line.
I think this segment and Mr. Anjum value here and change it to 75 degrees.
Now to the TRIMM entities to trim this unwanted part of the line.
The escape key sediq, this line segment with the meter entities to look in the mirror at about eight
bucks and then to the sentiment on the okay button.
Now we need to trim the unwanted spot, needs to line things to the trim entities to this port.
This fight is not this spot.
And see, we have a message here, item is unsolvable and there are conflicts.
So what I'll do is I'll select this.
I mentioned value.
We need to get out of the trip to make this damage in value and I deleted.
Now, I will check in with the two entities to trim this.
Now everything looks perfect.
Can see in the status bar the current status of this case is under defined.
You can add all the required dimensions by using the second dimension to make the sketch fully different.
Now we have completed the sketch.
And we need to go to the pot modeling in London so the criminal is active.
I need to get out of it fast.
I would select the sketch.
And delete.
Let's go to the park.
Morning.
Environmental sort of looks like on this xcept sketch button.
We are into the pot morning in what are the features, come on, manager.
And here we have this extraordinary floorspace to.
Now, if you look at the model, you have a draft on one side of the model and the draft angle value
you are going to use is 25 degrees in direction.
The depth values in both the directions are 10 units.
So the draft value in this direction, one is five degrees in and interaction two.
It is zero degrees in depth in both directions is 10 units.
So go to the extruded Wasleys to extrude property manager display and select the outer part of the sketch.
And see, a preview of the extruded feature is displayed.
Now we need to extrude the sketch in the directions that it's direction want and direction to.
The Action One Values tenement, which is already secure, you also need to add a draft angle to this
direction line.
So I click on this draft on off button.
Craft angle, that is 25 degrees.
So it is okay.
Select this dedication to Checkbook's.
And in this direction, the draft angle value is zero degrees.
We don't need to apply any draft in this direction.
So click on this button so that no draft is added in this direction.
This really has to change.
So let's change it back to tournament center.
I go to this selected Cantus added box that can select these circles on.
Check on this okay button to get out of the extrude to.
In this way, we have created this modern.
Contains the visual style from this display sign dropped on this.
The shaded for a better display.
Thank you for watching, the Swedien.