1
00:00:00,950 --> 00:00:08,690
Hello and welcome to the simulation in which we are going to proceed with the coding of this E.S.P,

2
00:00:08,690 --> 00:00:15,200
first toolbelt, now in the setup function, we need to start the serial communication for debugging

3
00:00:15,200 --> 00:00:19,610
purposes at nine thousand six hundred.

4
00:00:19,610 --> 00:00:28,580
Baudrillard And we need to begin the blink up connection using the blink to begin.

5
00:00:30,540 --> 00:00:38,700
It will take the authentication key, that aside, for the Wi-Fi network and the password as input and

6
00:00:38,700 --> 00:00:41,550
we need to start DHT since our library,

7
00:00:45,120 --> 00:00:50,610
then we need to set the time limit interval.

8
00:00:54,050 --> 00:00:59,000
Call the first and second timer, so a timer that set.

9
00:01:00,470 --> 00:01:01,220
Tavel.

10
00:01:05,730 --> 00:01:12,480
Answered interviewer Now that said, interval function for the timer will take two parameters, the

11
00:01:12,480 --> 00:01:22,850
first one is the time we need to send the DH values Western values every two or three seconds.

12
00:01:25,840 --> 00:01:33,160
And you need to define the function, but you need to send so since and so the etch.

13
00:01:34,720 --> 00:01:45,220
And the second one, we will send it we will send the liberal answer and most liberal sensor data every

14
00:01:45,220 --> 00:01:47,590
six seconds or seconds.

15
00:01:48,280 --> 00:01:50,800
Now go this and base Bastia.

16
00:01:52,900 --> 00:01:57,070
That's it now inside the loop function, we need to write blink.

17
00:02:00,540 --> 00:02:05,730
Duran Duran, The Bling Connection, and we need to run the time out to.

18
00:02:09,510 --> 00:02:14,820
Now, just to make sure that we have product timer are great.

19
00:02:15,240 --> 00:02:18,300
Now click verify to make sure that we don't have any errors.

20
00:02:20,210 --> 00:02:28,070
We will get back to the court once we set up the blink up and we have our authentication code and we

21
00:02:28,070 --> 00:02:32,660
will enter our Wi-Fi as a society name and password.

22
00:02:34,380 --> 00:02:40,890
And the practical lesson at the end, and that's it for this lesson, what we have done here is basically

23
00:02:41,280 --> 00:02:51,630
we have started the communication that blink, stop or begin biggest function and that the Tucson library,

24
00:02:52,710 --> 00:02:58,390
we have set the timer interval for the first method and the second method.

25
00:02:58,860 --> 00:03:05,610
So we will get the sense of values every three seconds and we will get the water and soil moisture levels

26
00:03:05,610 --> 00:03:08,250
and so value every six seconds.

27
00:03:08,730 --> 00:03:17,640
And inside the loop we run, we use the round function for the blink and the time of libraries.

28
00:03:17,820 --> 00:03:21,300
That said, this is everything that we need to do.

29
00:03:22,170 --> 00:03:25,900
If you have any question regarding any of these steps, I'm here to help you.

30
00:03:25,920 --> 00:03:26,940
Thanks for watching.

31
00:03:27,810 --> 00:03:29,670
Next, we will explain the blink.

32
00:03:29,670 --> 00:03:33,960
And this is Usher from educational engineering team.