Hi, everyone.
Welcome to today's strategy.
And in this we do, I will be showing you how you can create a 3D moorcock in Adobe Illustrator.
So in this so in these series, I will be showing you how you can tweak these type of 3D moka from the
packaging design templates that I had already created from my previous sections.
So I highly recommend that you first go to that packaging with use first and learn how those templates
are made.
Then once you've completed that, then it'll be a lot easier for you to follow along the steps to me.
Such type of what 3D markup.
So as you can see that I've me, I've created tiny views of my packaging template for a light for a
light bulb.
The front side, the back side and the side view of my lightweight packaging.
So and I've already saved this document in an in an easy format as well as a backup so that I do not
lose this.
I did not lose this seedy mock up.
I do.
OK.
I'm going to go ahead and open up my iPhone.
I need to look for Rick Faustus gift.
Yeah, I found my template right here.
Exactly, right up to this was their template that I had created up on Adobe Illustrator.
So as you can see that this is for this packaging design is for a light bulb.
However, I have shown only the three views of this, namely the front side.
This portion, the back side.
Right.
And the site portion as well.
I'm going to show the back side as well, because it's the same as the front side.
And over here are these flaps just indicate that though these lapses indicate that it's being folded
in to one clause, books like that.
OK.
I'm going to go ahead and unlock my attempt.
Bleakly opposed.
So I'm going to select my.
So what I'm going to do first is that I want to create some goods.
So I'm going to select this document along with the text that I had written, because every single thing
is important and I do not know.
And I want to make sure that I do not miss.
So don't miss out on anything.
So after you've selected all of these portions from the front, just this front portion make clicking
on to shift as you zoom out again and drag this weight control with Z.
So I'm just going to make a copy out of this.
So I just click on on and make a copy.
Right.
He'll do the same thing at the on with this got side one as well.
So I'm going to select this.
Click on oint two week of copy and just bring it right here.
Similarly onto the side one like this over heel.
And I just want to click on Old and you right it as well.
Since the awkward you feel it's your weight issue if you want to show with the side view as well.
But in each case, if you just want to show the front and the back side, you can do that as well.
So just for now, I'm going to show you how you can recreate, like you can show three sides as well.
So I wanted to select this one.
And I'm going to group them together as well.
Group.
This one as well.
So once that's me and it's going to select this and open my eyes in the Sky News right here, I'm going
to select one and then just bring it right here.
So I want to let the export die.
The movie clipped is going to be dynamic, Semba.
And
yeah.
And I'm just going to name this symbol as the site symbol since it's going to come on this side like
that and click on, OK.
So you can see that the sites and becomes comes right here.
So similarly, I'm just gonna check the back side one on this and responded again.
I named this swine to be.
Backside timber.
And let all the other things be the way it is, and I'm going to go ahead and click on Newquay and going
to do the same thing with the French one as well.
So this is the front, Simba.
And OK, so you've got this is going to zoom out.
I'm going to select the template that we had meat and I'm going to go ahead and click on DELETE.
You'll see that in a moment.
Why?
So what I'm going to do no.
Is no, actually, do I do need my template for.
No, OK, just one.
One is a select his background.
Click on on it to get a copy and then just bring it right.
Yo.
And not just gonna select the template and now delete it like that.
And I'm just gonna make copies of my background like this because I want to show three different sides.
Right.
OK.
I'm going to select this first one.
Come over here to this effect by news.
Go to this 3-D illustrator effect.
I'm going to go to 3-D and I'm going to select on extrude and beveled.
Covering this right here on this side would be odd.
So it's easy for you to see.
And it's easier for you to see it.
HBO is going to just adjust the positioning of the cue like this.
OK?
You just cheat like that.
They extrude depth.
I'm going to keep it 550 points like that.
The gap when I worked on The Gap on for a solid, solid appearance beven.
That was share.
Yep.
I just wondered.
Chafed like that suffers plastic sheeting.
Yes.
And if I click on Preview, this takes a couple of seconds.
And there you you can see that this TV effect has been me now keeping that selected.
I'm going to go over here to this map artwork.
And as you can see, again, this frontside image that you see over here is this one right here, your
way to the side, which is highlighted in red.
You can see the same side over here.
Right.
So when I add the front portion, this image right here onto this side.
So the symbol that I had saved was this one.
This front symbol wouldn't select that ranging this ability.
Yeah.
So once that comes, you can see that it automatically gets fit inside my front side as well.
So once that's done, you can see that this is the back side as well.
The side to do.
And see which one.
Like that.
Go ahead and check on, OK?
And OK, so we've got this.
I'm going to do the same thing with the other two as well.
Want to select this again?
Go to effect c.v excluding Beven
that give the X2 decks to be 550 points.
Click on Prevue to check like that.
Go back to my board.
And this time I'm going to add the back side.
Boom.
So it takes a few seconds, so don't worry.
And just be wait patiently for it to look like that.
Let go.
Okay.
Quick on this last one.
Good effect.
3D extrude in bed with extrude.
That remains to be 550 points.
And I'm just now click click on map out.
No way to preview.
Yeah.
Then I go do my part and now I'm just going to add the side cymbals as well.
I didn't like okay.
OK.
Then he's gonna select these three.
Now, we do not need them at all.
We're going to select all these three.
We do object.
And I'm going to click on expand appearance like that.
And I'm just going to ungrouped these two like that so that I can now individually choose these shapes
and I degreed in full as well.
So I don't want to select the sites for no.
And I going to add the same legion like this.
I'm just going to adjust.
Whoops.
Yeah.
So I'm is going to adjust the angle to be 90 degrees as well.
And then you can just play around with the gradient slider like that and see whichever one suits you
the best according to your package.
And once that's done, you can go ahead and delete this.
Now I'm just going to select the front portions like that and change the food to black as well.
And there you go.
So I'm just gonna select these again are probably just going to select.
No, it I'm going to select the sides
like this.
I'm going to you know, I'm going to give this talk to me by I I'm probably using Keays the word stroke,
two, three points like that.
And there you go.
We have not successfully meet these.
And I, I'm just going to select them and also just keep this our size down like that and bring it right
here onto my document.
He's going ask you this down a little bit more for it, though.
I like that so that I can just adjust this onto my document.
His case was gone, it did not require them.
But as a skier, this went down as well.
Right.
And then just place your views accordingly onto the sides like that.
Is one of words.
Scale is going on this side.
Give it to ships like that.
So I was going to select the front portions like these.
And I'm just going to add a drop shadow effect as well to give it a more 3-D effect, and it's going
to go to Stylize and click Control Shadow.
And in the opacity, I'm just going to change the capacity to 55 percent and let everything else be
the way it is.
I want to go ahead and click on it.
There you go.
You can see that the 3D effect has been added.
And I was going to add here as well on this side as well.
Stylize drops shadow.
OK.
Like that, I can see that after giving it a much more by giving it all shadow effect.
It looks much more Brdo and it looks like a TV effect as well.
So now that we've made TV mock up, now you can just go ahead and order save a file in an E file first.
So he's going to go ahead, click on file, click on Save US.
And he's going to change the filing to be Sheedy's more up.
Light word packaging template.
And I'm gonna go ahead and click on Save and.
Okay.
So this will take time for it to be saved in NDA filing, that's completely OK.
So as long as you guys you don't not forget to save your work.
Keep saving them.
Because if you add a lot of effects, Adobe Illustrator has a tendency for it to get hanged and then
it can crash as well.
Do not want that to happen.
And that's it.
Now, we have also saved it up as an easy fight and we have come to the end of a video.
I hope you find this story to be useful and you can do the same thing.
See?
Same thing with the other templates as well.
Thank you for watching and stay tuned for more.