Hi everybody and welcome to the video on installing and using virtual box.
So as I explained in the previous video that virtual box is what we're going to be using for virtualization
of any particular OS that we might be using.
So for the Linux we're gonna be using Santa W and for Windows we're gonna be using Windows Server 2016.
So you're getting familiar with the server based deals as well as windows in general.
So there are gonna be two links above the video here.
One is for Microsoft and Windows Server 2016 ISO download as well as the Oracle's VM virtual box download
link as well.
Now this particular case I'm going to show you how to install virtual locks and download the iso but
this is gonna be done on Mac.
However the process as far as the steps involved are gonna be should be exactly the same on a Windows
machine.
So in the first link you're going to see the Windows Server 2016 here.
We're going to click on making sure this is the Windows Server 2016.
We're going to click an ISO continue now for this.
I just filled in some dummy data.
It doesn't it takes the the work address but it does not actually work.
It's not actually required in terms of it send you an email that you have to go and get doesn't do that.
So you can just fill it in with dummy data click Continue.
Select your chosen language and download so once you hit download you will get a ISO that begins to
download which I have already done.
It's about seven gigs so an ISO is a disk image that can be used similar to how a C.D. is a suitable
C.D. is done.
So think of it as an image that's beautiful.
Right.
So now you've got that downloaded which I'm not going to redo because it takes it could take up to 15
15 minutes depending on your internet speed might be more might be less.
So the next link at the top is for virtual box.
So when you get here you'll see windows host OS X Linux and Solaris so in your particular case you might
be running windows you're going to click here OS X users you're going to go here for Mac when you click
on that it's going to download just like normal and then you're gonna get either a dot DRM G for Mac
and a dot EMC for windows.
However running it should be the same.
So for a Mac we're gonna go ahead and run through this.
So we're going to go ahead and open it.
And now for Mac users you're going to see this for Windows.
It's not going to show you this particular screen right here.
It's going to pop up with this one when it's done when this is done loading you'll see the next pop
up on the screen.
This is what you're going to see a general layout of for windows so you should see something similar
to this for Windows.
Next thing you do has hit continue you're going to unless you have a specific place you want to install
this.
Just leave it as is and then hit install.
Now I already have it installed so I'm not going to hit that here once it once you install it it'll
just say complete and then you go ahead and close it and then for Mac users it's going to be under the
applications and for Windows it should just be on your desktop.
So I'm to go ahead and cancel this cancel this.
Go ahead and open virtual box.
So in my case I'm going to have a few machines in here that I've already been using in the past.
So for you.
These are not going to be here.
This is going to be completely empty.
However the UI should be the same between Windows and Linux.
So what we're gonna do is we're going to show you how to install and use a Windows how to install Windows
Server 2016.
So the first thing we're going to do is create a new one.
You're going to give it a new name so we're going to do windows test for from our particular case.
We're looking for Windows 2016 64 bit now for memory and for for our testing purposes 2 gig is fine.
However depending on your system you might be you might have to bring it down to one.
So we're going to leave the default settings of creating a virtual hard disk which is fine we'll go
ahead and create and for the disk space 32 gigs is fine.
We don't we won't be needing anything more than that for for this particular course.
And we'll leave the disk image the same and dynamically allocated so we don't produce the full size
at once.
So I'll go ahead and create and we'll let that run.
So now we've got our machine right here.
Before we do anything this currently does not have an OS attached to it.
So you wanted two things.
We want to switch over to.
Sorry.
We're going to go to settings and then we're gonna go to the network tab.
Now depending on how you want this to be connected you may want to do a bridge mode or a Nat mode.
So for now I'm going to we're going to go over what that is and what bridges in the networking module
but for the sake of this particular video and for testing during this this module and the next you're
going to keep it on that.
Just make sure that that set.
Next thing I want to want to do is go to storage.
So what we need is we need to add a new storage.
The reason this is important is because currently if we tried to boot this up it would tell us that
there's no operating system.
So we need something to boot from.
Right.
So we're going to do a new ad I.T. controller that's completely fine it doesn't actually matter which
type it is.
So we're going to add an optical drive here and we're going to choose a disk in this particular case
we're going to want to use the ISO that we were doing that we just downloaded.
So we're going to use the Windows one here going to click open lives.
And OK.
That's why I'd say the settings know what we're gonna do is we're going to go ahead and launch this.
Here we go.
Perfect.
So now we're gonna run through.
This is gonna be a quick run through of the windows server install.
I'm going to pause when it actually does the the install because it can take a little bit.
So we're going to wait for it to finish loading bulk files.
Perfect.
So we want to do is really this is default and install now.
Now we wait.
So I'm gonna go ahead and positive video here and I'll kick back when this is done.
Hey everybody so I'm back.
So we're going to take a look at the windows evaluation.
We're going to want the standard one.
We don't want any data center
not included.
OK perfect.
So they changed it up.
It's been a little while.
So we're gonna want the desktop experience.
We're gonna want to make sure that this is the one selected and next.
Gonna go ahead and accept.
Now I want you to all understand that this is a 180 day trial.
So after about 180 days it's going to fail and you're going to have to re download a rebuild and reinstall
the operating system again.
So we're going to install windows keep files.
Perfect.
OK.
So we're gonna do a install windows.
We're gonna make sure that this is the disk that we want to do it next.
Which it should be the only one.
So here we're at.
We're just going to give this a second and I will be back when this is done.
Hey everybody and welcome back.
So once the once that reaches a hundred percent it will go ahead and reboot it will come up at first
saying Press any key to boot from discourse.
You're just going to want to have to leave it alone and we will just wait a second for this to complete
and finish to boot up
so getting devices ready at 50 percent 75 80 100.
Perfect now I only have to do this once per install so once you reboot it it should be pretty.
It should be pretty pretty quick on the reboot.
So as I said we're going to leave this part along
then we're going to let it.
Now we're gonna wait for the going to load up.
Looks like I clicked on a little too quickly.
We explored the XY
your ship you shouldn't see this on yours it should just load up.
There we go.
So now we're going to let it build up the profile.
And this is where I'm going to leave the video.
So once this finishes up building up the profile you should be able to bring you straight to the desktop
and from there we will continue on with the rest of the module.