Installed in a studio built to on ISDN will cover the following understand in a studio peer version
to install managed to put two on IRS Version 10.
We'll talk about configuring a studio P2 on ISDN upload and dot net web pages.
But before uploading I'll show how to create a simple Web page or better to say dot net project to test
on your eyes and then we'll test uploaded web pages.
But first a few words about a stupid to EU to be version to the newer version of a TTP and is used to
reduce the impact of latency and connection load on web servers by Symantec flow over to speed connections.
The H2 P2 protocol can work on Windows stand and Windows Server 2016 windows turn on Server 2016.
Both have the latest version of I.S. server which is a US version term currently only ISDN supports
ETP too in ETP to a persistent connection can be used to provide services to multiple simultaneous requests.
We know that every two speed connection requires a round trip to setup a connection between server and
client H2 to be to sharply reduces the need for a request to wait while a new connection is established
or wait for an existing connection to become idle H2 DP 2 introduces each pack a compression scheme
for H2 to be headers that reduces the redundancy between requests compression helps Multiplex and because
requests are smaller.
This enables clients to make many requests in their first packets on a connection while to simply flow
control windows are a still small issue to be too.
Also introduces the concept of push the server response to requests that client hasn't made yet but
informed that the client can cache and reuse on other pages if push supported by an underlying connection.
Two things happen.
A push promise is sent to the client so that the client can check whether the resource already exists
in the cache and in your request is added to the request queue for the post resource.
How do you know that a website supports H2 to too.
We'll have to do several checks we'll visit a few Web sites and check whether ETP to support it or not.
And are going to see how we can check if the website is run and I on a stupid 2 or ETP one that one
to follow along.
You have to have Internet connection and around an age TTP Web site for example Google dot com.
Now let's open Internet Explorer or chrome and go to the address bar and type da ba da ba da ba da Google
dot com.
Once you open Google dot com it will redirect to ETP P.S. call and slash slash triple w dot google dot
com.
Now we have to check if Google dot com users a stupid tour or a stupid one will hit F twelve and go
to settings and switch to the network tab.
Here you'll see that as TTP as Google dot com was used in H2 to to protocol in protocol column.
What do we know how to check it.
Let's go ahead and create a spear dot net web application for testing purposes.
For this you'll need to download install and open Visual Studio to do this.
Just search Visual Studio.
Go to visual studio download section and click on free download on community section.
It's free for students open source contribute or send individuals after your download this software.
You'll have to install it after it is done.
Open Visual Studio click file and then new project to the left select web and then a speeder net web
application.
Give it a name like death step or some other name select framework
and click Okay.
By the way you can also select location where to keep your files.
You can click browse to change the location managers don't click Okay.
When the project is created you can click file browse viewing browser.
Now let's go ahead and install it should it be too on our ISDN server.
We are going to set up a two to put two and to enable the log and options through ISDN.
We'll also cover how and where we can perform the necessary changes in the registry.
So let's go ahead and cover the installation and configuration in detail.
As usual we'll open server manager on Windows Server 2016 click on Tools menu and open.
IRS manager click on the as server and we'll get the feature view find out the log in certain and you
can configure it using log in on your web server or web site to record information about ETP requests
and errors.
The information in your log can help you troubleshoot or Optimize Your Web site.
So let's go ahead and double click on log in and you'll see the site is selected as the default log
file type and the log file format is W3.
As with a lot of fields as options log in configuration steps help us trace log files and check Web
site access through ETP or ETP to.
As you can see one log file or a site which is the description of the first drop down menu.
It means each website has its own log file hence it'll be easier to use the log file information.
We have an option to select the log file for the server so it'll create one log file for your server.
This means that if you have hosted many websites per server and you have one log file for that site
it could be very difficult to trace the log information.
That's why we have selected site wise log files that are a lot of options available in W3 C log and
fields to identify using hostname IP address and port as well as client IP address and so on.
Now you have the option to choose a log file format the default selected is W3 C.
Now we have to enable one of the protocols.
Click on the select fields option and you'll get the W3 C log in fields window.
You have to mark the checkbox for protocol version c s version protocol version will generate the log
file center for a to be one and a stupid two protocols.
So our requests will generate site wise log file for the website and also log the protocol version to
the log file as per the client's requested protocol version.
You can see the details of this look at C drive iiNet pop logs log files folder No we have to make a
registry entry for ETP to Internet Explorer is connected to ie server over TALF which negotiates H2
tribute to wire TALF extensions so you do not need to make any changes on the server side.
This is because the H to dash 14 header specified the use of ETP to draft 14 is sent by default over
TRL as the protocol version option which we checked will generate the log file for Web site access with
either the TTP or ETP 2 protocols.
Now let's do some registry change for this you'll have to run common prom type rejected and press enter.
Make sure command prompt is run in with Administrator authentication so this command will open the windows
register editor will go to HQ local machine registry key the system folder the current controls set
folder and the services folder to complete our task will expand student P and select the parameters
folder you have to create a new registry entry queue Ward Well your named Ju enabled inside the parameters
folder right click on the parameters span and create a queue for 10 3.
Now you can see a welder named Geo enable to as well your data 1 Select base as hexadecimal and click
on Okay close the Registry Editor around report you have successfully completed to the setup of H two
To put two So to recap we first opened tires manager and set up log in sentence to trace the website
access log.
Logan has nothing about right and information about Web site activity to a log file.
We enabled the protocol version which will help us get Web site access activity information regarding
ETP and [REMOVED] tribute to.
We also opened Registry Editor and made an entry called dual enabled which will work for the H2 tribute
to protocol.