Using a virtual machine we are not limited only to emulated or virtualise the hardware.
We can pass it in hardware from the host machine directly to the guest as well.
Let's take a look at using our U.S. we drive.
We could just as easily use the US we've got a webcam or a printer or something else.
I would check them my guest all-British system and then I will go into the setting and use us be on
a Mac.
You will find the under the old settings.
I can choose to use US me one dog one.
You asked me.
You ask me three controller.
Yes me one going to one is the default because to enable the other do we need to have installed a virtual
box extension back.
We did that hardly an hour lectures.
But if you see an end of the next two or three here you will need to check to make sure you have it
installed.
You can still use me without them but only the slow one blind one Sternbergh.
I'll plug my yes we drive into my system the vaguely I believe device to the guest is by using a filter.
Us with devices have manufactured and model codes which is code the system can't tell them apart.
On here on the right side of the list I have two option enabled us to be ACORN with the blue circle
and one with the green plus the button with the Blues creates an empty hole that is a filter with no
information.
And late I read one and then click on the board button then click on the button with the yellow circle
to activate no information.
I don't know this information about my drive so I will close out of here and delete this filter using
a button with that egg minus the button to get the green plus lets me choose a device that plugged in
to make a filter for I will choose my flash drive from the least I know if I did what is what it's like
here.
This specific information for the software to identify my drive with this will turn in place when the
guest starter.
It will look back on the hardware to itself
effectively begin 8.
Right then we can also get them ready and politically add or remove us devices from the guest by selecting
or selecting them from the menu up here.
And their devices and us we are from the U.S. be acorn on the status by adding a device this way we
will try again control of it from the host of any system.
But that does not always work.
Be sure to check that.
The host is using a device before you give control of it to the guest if you don't need the gas to automatically
connect to device.
You can disable or delete the filter from the filter list in the USP settings.
For the system but no I really liked this.
Dr..