Mostly little machines are used for development mentors like learning I'm upset about on board 8:0 or
get a base board on double 3 0 6 and for other purposes that requires specific ports to be available.
If a guest is operating in bridged networking mode we're going to be able to access the ports on the
guest unless they are blocked by our firewall.
But if a guest is in lurk mode we don't have a way of getting to the ports.
That a guest might be using to host our service Roger baulks gets around this limitation by allowing
you to map or forward upload from a guest to a port on the host
making whatever services is running on that guest board accessible at the hosted address with a different
board.
Let's take a moment and install them over here in the agast are based on Apache and if you are on Windows
you could install XM or similar to follow along.
All right.
Apat install Abaci too.
If you open up Firefox and visit my guest address I can see the welcome page for the web server.
Trying to receive the same address over here on my host will give me an error.
I need to forward it.
The road through to host
to make this database accessible.
I need to forward the board in order to configure port forwarding.
There are two parts to get the same result.
If your system is just running in that mode you can go into the machine network settings under the laws
and click the port forwarding button.
For me it's December because instead of Nag I am using TechNet log so I need to make the team at the
network level to do that.
I will go to the preferences for what toolbox and choose network and then select my net network
here.
There's a board for billing but then whichever route you take you will come to this window to setup
port forwarding rules.
To add a rule I will click like on here with the green plus I can give the rule name.
I will call it web server.
And I can do it between TZP and UDP for my web server here.
I need DCP but some others have seized me may need UDP or both.
And in which case
you don't make one rule for each protocol.
I believe the host IP blank and the host board is set to 8 0 8 0.
I need to use a board about 1 dealer to 4 on a Linux or Mac host but I can use anything I want on Windows
then I need to put in the guest IP address and remember Diaby.
In my case as you can see on the screen there because my machine is and on magnet log if it were just
on that the IP would be different based on default settings.
You can double click the IP with the networking tools for your platform.
The level set the guest for 2 8 0 which is the board that the web service is running on.
Then I will press OK and leave the settings.
You may be prompted locks to the port through the firewall.
No I will go back to browser on my home system and I and type in localhost.
Remember this is a port on the host computer that we are accessing and we use it 0 8 0 4 4 8 8 0 0 there's
my welcome they showed from the guest Twichell machine.
I got access this from other computer in my network.
Using the IP address of the host I am.
Had happened to know my IP here on the host is.
And for these 8 0 0.
And there we go as a common uses for port forwarding to against include allowing access it on a remote
shell or desktop access and opening a board for ideas on the development of virtual machine.
If you forward a board and you are not able to connect to the service you expect to walk be sure you
be sure to check whether that gets to as has a firewall that blocking access.