Toolbox it's networking services to your.
And we can get all divorced networks or things satisfy different needs.
Let's take a look at the different worlds that all of us for saving deals that are going on.
Let's say this is all the host gumboot.
And this is the virtual machine running on host.
Let's also say there's another virtual machine on the host.
And there's an other computer on the network with the host.
And here's the Internet by the phone to the guest.
The machine is set to use that or network address translation.
This allows the guest to access the internet but prevent other chill machines or machines on the network
from communicating with guest in this mode.
Our guest is given the IP address
as you can see on the screen all its own private network.
If you start up another net networks your machine.
It also gets the IP address on a separate private network.
Not really if you need if you just need the gas to access the Internet.
This is not the problem.
But if you need your guest to interact with other guest or with the host or with other other machines
on the network you need to use a different networking mode.
To enable guests to communicate with each other we're going to use that network more which still uses
Nat but creates a virtual network for guest show and then we add guest to that network so they can communicate
with each other.
And they can communicate with the Internet.
We need to create a net network in the virtual box settings to allow this as we will see in our moment
in this that.
The guest might have the IP addresses as you can see on the screen.
But they can and cannot communicate with our host or other machines on the host network on other machines
not on the net net wog.
If we need the guest to communicate with the machines on the host network we can level bridge mode which
joins the guest to the same network as the host.
This allows bridge to get to communicate with each other and with the host and machines on the host
network.
As we know in a virtual environment.
Host and the guest host is is the best operating system and top of we are running what little machine
logs on what toolbox we are running guest machine.
So this is a little difference as well as with the Internet.
In this scenario the IP addresses for all the system will be in the same range.
Whether this seeing is controlled by the host network not by the virtual in which your boss and internal
The more virtual machines can communicate with each other but not with the host or with the Internet
they need to have their own addressing scheme set up manually and host only option.
Networking walks like internal but the host is included included in our private network so guests can
communicate with it.
By default this set sets up a network and the host RBOC be ECB said rolling.
And then assign addresses ending with as you can see on the screen and above but that this can be customized
if need be.
Let's take a look too hard to read between these boards in virtual baulks the last two places we can
use that word settings.
There's a set of options in each guest preferences and there's a global setting for what you're lummox
itself.
Let's take a look at the setting first.
Some of these things we can teach and while the guest is wounded but I haven't shut down the guest here
for now and the setting for a virtual machine in the network section we can configure the network on
up to
each guest can have more than one adapter configured differently.
If there is something you need to do but we will just focus on one adapter here.
I can just turn Neben are disabled and it will get up and choose what network it's attached to Nat as
we use our lead and the default being the guest in two weeks on live 8.
NET network we can do other options as well.
If I use net network I will see that I have an ad in the valid settings.
That's because there's no net network yet.
We need to create one before we can use it.
I Wilkenson out of the sitting morgue's and go to the provinces for the toolbox apps
here on the network network network and that networks I have placed will define our network and I do
that with daikon of the card and the green Bluff's you will see step by step dad made it work.
So I will click the screwdriver icon to edit it and I can see I can choose whether it's on a bird what's
it called.
And I can set the site off of the address is that network can be configured for.
In this case as you can see that that work I can choose whether to configure the ACP if it's on a bird
or automatically assign an IP addresses in that range to the guest.
That's useful but sometimes you don't want to deal with it so you can turn it off.
There are option for IPV sake says Ron.
This is fine so I will click OK and OK again no back in my guest setting.
I'm done at.
I will click on net.
Then I can use the net network option and I can see the net that I just created.
Changing to bridged.
Give us the option of getting up to use on the host.
You want to use the interface that has the network you want the gas to be.
Bridge bridge to you it usually you will want an 800 interface if it's available online.
The setting going to be a little bit tricky on a laptop because if you set up on Internet and then take
your laptop some when you are using Wi-Fi virtual Amox wants which for you because there are different
interfaces.
So if you use bridging give that in mind if your guest networks stop working.
If the interface on Beijing does not have network access neither when you are a guest I can choose it
done at work and our host only for those private network mods.
I will go back to that one though and I will open up.
That was the plan.
Here we can sit the virtual network and upload time.
But if you if your guest does not support it you can try some older or more generic models.
But if you use a mod when it does you can use the scope here and in the MAC address box I can set the
MAC address off the interface manually or denude or not.
If you are joining more than one VM to the same network you want to make sure they have different MAC
addresses you might run into some problems.
Here I can choose whether the cable is connected virtually to the interface and I can use port forwarding
to ALLOW IT network boot on the gas to be mapped on forwarded to port on the host.
We look at that in
a little lecture.
Connect this gets to the new.
Net net look and press OK.
I will start to start the machine up and I will Day-Glo.
I will look at the network setting in the OS.
I can see that this machine has an address in that range.
As you can see on the screen is turned off as it had with just nedd.
If I reach another machine to be on the network boot it would get the simulator address and we be able
to do it between the guest and with the Internet
the next next year we will learn be forwarding board for services for with.
See you in that lecture.