1 00:00:00,470 --> 00:00:04,730 Hi, in this video, I'll show you how to create an access point on Linux. 2 00:00:05,360 --> 00:00:13,340 Now the first thing you need to do is to install DNS mask and host APD by typing APD style DNS mask 3 00:00:13,340 --> 00:00:17,810 and host APD in the terminal and press enter. 4 00:00:18,410 --> 00:00:24,440 Then you need to stop all the interfering processes using airmen and G Check here. 5 00:00:25,580 --> 00:00:33,980 OK, so the next step is to create the configuration files for the DNS mask and host APD, and in my 6 00:00:33,980 --> 00:00:37,940 case, I already created the files in the home directory. 7 00:00:38,570 --> 00:00:44,570 So if I use URL, as you can see the DNS most config file and host APD. 8 00:00:45,950 --> 00:00:53,930 OK, now let's understand how these files were so old that manual, which is a text editor and put the 9 00:00:53,930 --> 00:00:55,550 name for the config fired. 10 00:00:56,420 --> 00:01:02,180 And here in the first line, you need to put the name for your wireless interface, which you can easily 11 00:01:02,180 --> 00:01:04,970 find using A.W. Config Command. 12 00:01:06,110 --> 00:01:09,800 And the next line will set the IP range for the clients. 13 00:01:10,610 --> 00:01:18,710 So when clients connect to your access point, the GCP server will give them an IP address and then 14 00:01:18,710 --> 00:01:20,810 you have the Gateway IP address. 15 00:01:20,840 --> 00:01:29,000 In other words, the router and the DNS server, which is used to translate domain names into IP addresses. 16 00:01:30,610 --> 00:01:39,160 All key notice close this file using Quantrell Plus Eggs and open the host APD config file using nano 17 00:01:39,160 --> 00:01:41,020 and the name of the file. 18 00:01:42,190 --> 00:01:48,250 And here we see some very simple settings, and the first line is the wireless interface double blue 19 00:01:48,250 --> 00:01:49,210 line zero. 20 00:01:49,840 --> 00:01:54,850 And the second is the wireless network name, which you can change it to whatever you want. 21 00:01:55,690 --> 00:02:03,160 And then you have to put the channel number and the driver and to see the file use control plus or to 22 00:02:03,160 --> 00:02:09,420 write and and control plus x to exceed all key. 23 00:02:09,460 --> 00:02:17,080 So at this point, you can start the access point using the following commands DNS Mercedez see and 24 00:02:17,080 --> 00:02:21,910 put the location for the configuration file and press enter. 25 00:02:22,570 --> 00:02:27,730 And now the D.A. and the server is running in the background. 26 00:02:28,690 --> 00:02:37,360 Once done with that type, host APD put the location for the configuration file and press enter. 27 00:02:38,170 --> 00:02:42,190 And you can see that this Wi-Fi network has been started. 28 00:02:43,570 --> 00:02:48,640 OK, now let's go to a Windows machine and see the wireless network is visible. 29 00:02:49,660 --> 00:02:51,140 And here are my taskbar. 30 00:02:51,160 --> 00:02:53,430 You can see the Test Wi-Fi network. 31 00:02:54,790 --> 00:03:01,810 Okay, so let's go back to the Cali machine and show you another simple method on how to create an access 32 00:03:01,810 --> 00:03:02,320 point. 33 00:03:03,010 --> 00:03:08,500 And this time I'm going to use a tool from aircraft called Airbase Energy. 34 00:03:09,220 --> 00:03:17,440 So in the turret type airbase G Dash and put the wireless network name, then you need to set the channel 35 00:03:17,440 --> 00:03:29,200 using DC and put the channel number and the wireless interface W Lens Zero and press enter and the access 36 00:03:29,200 --> 00:03:31,180 point is up and running. 37 00:03:31,960 --> 00:03:33,560 So that's it for now. 38 00:03:33,580 --> 00:03:36,400 Thanks for watching those Unix time.