Hi, everyone, in this lecture, we are going to learn about how to change the mood over Wi-Fi adapter.
So this is the first step to put your wireless card into a monitor mode, swim monitor mode, your card
can listen to every packet that is around us.
So by default, the mode of our wireless device is set to manage mode.
That means our wireless device will only capture packets that have our device Mac address as the destination
packages.
So it will only capture Parker's data actually directly to our guy Limousin.
But we want to capture all the factors that are within our range, even if the destination market is
not our Mac address.
So, guys, let's see how we can do that.
So in order to do that, we need to set our model to promote.
So let's see how we can change the mode of our Wi-Fi adapter.
OK, for that, you need to open the terminal window, which as you can see here.
Now, let's zoom here.
And the first step is that you need to connect your Wi-Fi adapter with the device in which you're using
Linux.
So after connecting so you can see that in devices and USB, you can see that I'm having Atheros, U.B.
nine Wannsee.
So this is the adapter that I'm using.
OK, so you need to select to adapt then and after this disclosers and in order to check it disconnected
or not, simply if config and hit enter so often enter as you can see that villans zero zero.
That means we are, we have successfully connected with our Wi-Fi adapter.
So now let's check how we can see actually work with it.
OK, so first of all, let's clear this particular screen and the first go on that I'm going to give
you is if config.
If config name of your wife interface and simply don't know what it will do, it will disable the management,
OK, of after hitting enter, it is not going anywhere.
That means everything is going fine.
Then the next.
Come on, I'm going to give here is I w OK guys.
So let me sue you if config v line.
Up first of all, up, and then I'm going to sue you in which mode currently my debate is on.
OK, simply give the blue can be entered into soft lighting.
And as you can see, that mode is equal to manage.
That means we need to change the more to mind.
OK, so now let's do it.
So this is important to you.
That is why stop the process.
Now, let's see again simply if Canfor interface name down so it will down and then the next come on
I the blue config vilan zero mode is more neutral.
OK, so this command is used to enable the motor mode now to enter into Nuada.
That means everything is going very fine.
So now let's go on that.
I'm going to give you here is.
A gun free vilan.
Now it's time to up our interface, now to.
So now, as you can see that it is working.
Now everything is going fine now our device is now up.
OK, so now let's check by giving IWK config.
Come on, let's check.
Enrichment, currently it is on, OK?
So OK, so I w config, we learn zero in our data.
So as you can see that offloading under.
We are having more difficult to monitor.
OK, so this means that we have successfully geneste over monitor mode management to monitor more.
So as we all know that we have converged all can you know, we have changed the mood as more so now
we are able to capture all the Wi-Fi packets that are within our reach, even if the packets are not
dedicated to our computer or even without knowing the password of the target.
OK, so for that, we need a program that can capture the packets for us.
So this program we are going to use here is Adam Engy, so let's see how we can work with it.