In the previous video, we already learn about the concept of routing. 2
Now in this video, we are going to use another case, let’s remove several things that not 3
used, and then let’s import 1 more router. 4
Let’s change the router name, this is router 1 and this is router 2. 5
Let’s connecting router 1 to router 2, and from router 2 to pc 2. 6
For the ip address, in pc 2 still 192.168.2.10, and for pc 1 also still 192.168.1.10, 7
And then, interface between router also need an ip address, let’s say here the ip address 8
is 10.10.10.1/24 and here 10.10.10.2/24 9
Here we just focus on configuring the ip address, we are not talking about routing yet. 10
We will talk about routing later in the next video. 11
Let’s start with router 1, check the ip address, do show ip interface brief, 12
okay here for fa0/0 the ip address is correct which is 192.168.1.1, but fa0/1 the ip address should be 10.10.10.1. 13
Let’s change it, interface fa0/1, here we don’t need to no shutdown, because the interface 14
is already up, 15
But here the light is still red because interface in the router 2 is not enabled yet. 16
So here let’s just configure the ip address, ip address 10.10.10.1 255.255.255.0, 17
Next let’s configure ip address on router 2, no , enable, configure terminal, 18
let’s configure fa0/0 first, so interface fa0/0, no shutdown, and then ip address 10.10.10.2 255.255.255.0, 19
Next let’s configure fa0/1, so int fa0/1, no shutdown, ip address 192.168.2.1 255.255.255.0 20
Okay we have done configuring ip address on router 1 and router 2, \ 21
I think enough for this video, in the next video, we are going to talk more about routing. 22
Thankyou for watching and see you on the next video.